Loft & Eaves Fitted Wardrobes London — Awkward Spaces, Perfect Fit

Standard wardrobes do not work in a loft. A 2 m high carcass cannot sit under a 1.4 m eaves; a 60 cm deep unit will not fit where the rafters cut in. The only way to use the space properly is to design the wardrobe around the roof, not the other way around. Every loft wardrobe we build is drawn from a survey of the actual room — pitch angle, eaves height, purlin position — and assembled with on-site framing where needed.

Making the most of sloped ceilings in London loft conversions

Angled frames built on site to the exact roofline

We construct the angled top section of each wardrobe in our workshop based on the surveyed pitch, then refine the final cut on site. London loft conversions vary wildly in roof angle — anywhere from 30 to 55 degrees — and even within one room the pitch can change where a dormer meets a hip. Building on site lets us correct for that. The result is a wardrobe top that follows the ceiling with no visible gap, no infill strip, and no awkward triangular void above the doors.

Low-profile doors that don't fight the slope

Tall hinged doors do not work under low ceilings — they jam on the slope before they fully open. We use shorter doors stacked vertically, or sliding doors on a top-hung track, or push-to-open touch latches where handles would interfere with headroom. Every door is dimensioned around the actual swing arc available in your specific room. Where the eaves drops below 1.2 m we usually switch to drawer fronts or pull-out baskets rather than doors — easier to use, and they make the low section properly accessible instead of a place you have to crouch to reach.

Interior options for low-clearance eaves wardrobes

The interior fit-out matters more in an eaves wardrobe than anywhere else, because vertical space is genuinely limited. We typically split the wardrobe into zones based on available height: full hanging at the tallest point (usually toward the centre of the room), short hanging or double-tiered hanging where the ceiling drops to around 1.8 m, drawers and pull-out trays from 1.4 m down, and pull-out shoe baskets or storage boxes in the lowest sections. Internal LED strips become essential — natural light rarely reaches deep into an eaves recess.

Real London loft wardrobe projects

We have fitted loft wardrobes in dormer conversions across most of London — Victorian terraces in Tooting and Walthamstow, Edwardian houses in Chiswick and Muswell Hill, and modern mansard conversions in Hackney and Peckham. The rooms differ in pitch and footprint, but the approach is the same: survey the existing roof line, design the wardrobe to follow it, and build the awkward sections on site. Most loft wardrobes are installed in one to two days once the carcasses arrive.

Eaves wardrobe costs and what to budget

Loft and eaves wardrobes carry a small premium over standard fitted wardrobes because of the additional on-site work. Expect to budget:

• laminate-faced MDF eaves wardrobe — around £1,700–£2,000 per linear metre. Includes angled top section, on-site scribing and standard interior fit-out.
• Shaker or panelled doors — around £1,900–£2,300 per linear metre. Door construction and spraying add to the base rate.
• Full eaves run with sliding doors and pull-out drawers — £2,200–£2,700 per linear metre. Specialist track for low-headroom sliders and bespoke drawer boxes throughout.

A typical loft bedroom with wardrobes spanning one full eaves wall (around 3.5 m) lands between £6,500 and £10,000 installed. We confirm everything at the survey with a fixed quote and drawings.